Cannabis extraction residue supports active lipase in lab esterification tests

Valorization of Cannabis sativa Residual Biomass from Industrial CBD Extraction as a Renewable Support for Candida antarctica Lipase B Immobilization and Fatty Acid Esterification.

ACS omega • • Highly Relevant
🤖

AI Summary

This study asked whether residual Cannabis sativa biomass left after industrial CBD extraction could serve as a renewable support for Candida antarctica lipase B (CALB), an enzyme used to catalyze esterification. Researchers compared simple pretreatments of the biomass and tested the resulting enzyme preparations on long-chain fatty acids with ethanol. Milling alone, with or without buffer washing, produced active preparations; although SDS washing retained more protein, those preparations were nearly inactive.

The milling-only preparation achieved conversions comparable to the commercial enzyme Novozym 435 on two industrial palm fatty acid distillate fractions. It retained more than 80% of its initial conversion after five cycles, and in a continuous-flow reactor conversions were 95% or higher at a 15-minute residence time. These laboratory findings support the biomass as a low-cost, minimally processed enzyme support. This is an abstract-based summary: the abstract does not establish performance or economic benefits at industrial scale, or uses beyond the tested reactions.

💡 Key Findings

1
Milling-only Cannabis sativa residue supported active CALB preparations; SDS washing increased protein retention but resulted in nearly inactive preparations.
High
95%
2
The milling-only biocatalyst produced conversions comparable to Novozym 435 on two industrial palm fatty acid distillate fractions.
High
95%
3
After five cycles, the milling-only preparation retained more than 80% of its initial conversion; in continuous flow, conversion was 95% or higher at a 15-minute residence time.
High
95%

📄 Original Abstract

Residual Cannabis sativa biomass from industrial CBD extraction in ethanol was evaluated as a renewable support for the immobilization of Candida antarctica lipase B (CALB) by physical adsorption, and the resulting biocatalysts were applied to the esterification of long-chain fatty acids with ethanol. Because extractives released by the untreated biomass interfered with protein quantification, three simple pretreatments were compared. Milling alone, with or without buffer washing, gave reproducible immobilization and active, reusable biocatalysts, whereas SDS washing increased protein retention but led to nearly inactive preparations, indicating that protein loading alone does not predict catalytic performance. The milling-only biocatalyst converted two industrial palm fatty acid distillate fractions with conversions comparable to those of Novozym 435, retained more than 80% of its initial conversion after five cycles, and was operated in a continuous-flow packed-bed reactor with conversions of 95% or higher at a residence time of 15 min. These results indicate that this residue is a low-cost, minimally processed support for lipase-catalyzed esterification.

Explore More Research

Stay informed about the latest cannabis science.

Your stash, decoded.